❇ Thiết bị khuếch đại tín hiệu WiFi 300Mbps ☈
0 Đánh Giá
0 Đã Bán
17
517.800 đ
Quốc tế
thứ tư 04/08/2021 lúc 06:52 CH
🌖 (Ready stock) 300Mbps Wireless Wifi Signal Range Extender Smartfish Wifi Repeater
✅✅✅
- - this device amplifies / captures / expands wifi network signal ~ ~
- wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● 2X3Dbi antenna integrated antenna
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Xdi recommended that you give appropriate ratings
X it doesn 't apply if there' s a HUMAN ERROR.
X the items that want to be sent are always checked first so there won 't be any trouble
✅✅✅
👩🦰️⚗ Read compulsory notes before transactions
👩🦰️⚗ Check Stock before Order
👩🦰️⚗ The products that have been purchased cannot be returned
👩🦰️⚗ Do not accept any return & complaint in any form
👩🦰️⚗ (Ready stock) Smartfis
✅✅✅
- - this device amplifies / captures / expands wifi network signal ~ ~
- wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● 2X3Dbi antenna integrated antenna
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Xdi recommended that you give appropriate ratings
X it doesn 't apply if there' s a HUMAN ERROR.
X the items that want to be sent are always checked first so there won 't be any trouble
✅✅✅
👩🦰️⚗ Read compulsory notes before transactions
👩🦰️⚗ Check Stock before Order
👩🦰️⚗ The products that have been purchased cannot be returned
👩🦰️⚗ Do not accept any return & complaint in any form
👩🦰️⚗ (Ready stock) Smartfis