Mô đun kiểm tra nguồn điện USB

0 Đánh giá
83
51.071 đ

Quốc tế

thứ ba 10/12/2019 lúc 08:08 SA

Feature:Burn-in tests
Use for:test the mobile power charge bank

USB Discharge Load Resistance Power Resistors Mobile Power Testing Aging Resistor Module

Features:
Can easily test the mobile power charge bank, mobile phone charger, USB power supply and other output current is whether up to standard, as long as the resistance USB mouth to the top of the line.
Burn-in tests for mobile and USB power adapters are available.

Specifications:
Material: Wire-wound
Size: approx. 7.5x1.5x1cm/2.95x0.59x0.39in
Weight: approx. 14g
Color: As picture shown

Warm Tips:
1. When discharge, the resistance will be very hot, please pay attention to anti ironing, and do a good job of heat dissipation.
2. The discharge current in value, not 1.00A or 2.00A, is close to this value, such as 2A display 1.8A, if the relative is different, it is the normal situation.
3. 1A load resistor consists of a 5 Euro 10W power cement resistor.
4. The 2A load resistor consists of two 5 Euro 10W power cement resistors connected in parallel to 2.5 Euro.
5. They are fixed and cannot be replaced by each other. It is suggested that you can buy two of them together.

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
1 x Aging Resistor Module
#usb #load #testing #discharge #mobilepower #resistor #Module #Electrical & Test Equipment #resistancepower #wirewound

didays.vn

Tham gia: 10-12-2019

Cùng người đăng

Sản phẩm liên quan

Sản phẩm liên quan

Phần Mềm