Cuộn Dây Nhựa Abs / Pla 1.75mm Dài 10m Cho Máy In 3d
0 Đánh Giá
11 Đã Bán
14
19.300 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 11/07/2021 lúc 06:11 SA
[FLYING] 3D Printer Filament 1.75mm ABS/PLA 10m RepRap MarkerBot Print Material***********************Welcome to our NOBLEFLYING .Store, All the products are available.***********************Specifications:
100% Brand New with High Quality.
Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.
ABS and PLA Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.
The materials will work flawlessly with most 3D extruder' currently in the market.
-Material: ABS
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material ABS
Density 1.25g±0.05g/cm3
Melting Point 200°C
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/m2
Distortion Temperature 105°C
Best Printing Heat
210-240°C
-Material: PLA
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material PLA
Density 1.25g±0.05g/cm3
Melting Point 180°C
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/m2
Distortion Temperature 60°C
Best Printing Heat 190-210°C
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your attention!
Package:
10m 3D Printer Filament.
100% Brand New with High Quality.
Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.
ABS and PLA Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.
The materials will work flawlessly with most 3D extruder' currently in the market.
-Material: ABS
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material ABS
Density 1.25g±0.05g/cm3
Melting Point 200°C
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/m2
Distortion Temperature 105°C
Best Printing Heat
210-240°C
-Material: PLA
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material PLA
Density 1.25g±0.05g/cm3
Melting Point 180°C
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/m2
Distortion Temperature 60°C
Best Printing Heat 190-210°C
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your attention!
Package:
10m 3D Printer Filament.